Waco’s Best Restaurants

By Michael Allen

After growing up outside of the big city of Dallas, I was shocked at the restaurant selection in Waco. I have never been much of a chain restaurant kind of person, and it seemed like all Waco had to offer were average chain restaurants! However, after meeting older students during my freshman year, I quickly found out that Waco has many great and low cost restaurants.

Pic 2The first restaurant I have to brag on, which is only located in Waco, is George’s Restaurant. George’s offers a large menu, great “comfort food” and a fun atmosphere. It doesn’t matter if you order a chicken fried steak or a burger; you are guaranteed to leave George’s full and satisfied. My favorite item on the menu is the baked potato covered in fried chicken and queso. It’s not the healthiest item on the menu, but as long as you visit the Student Life Center (SLC) afterwards, you won’t have any regrets!

These next two restaurants I am going to group together, because they are both hole-in-the-wall burger restaurants. The first one is called Dubl-R Burgers, which is far down 17th street. It is definitely a hole-in-the-wall restaurant, because from the outside, you would almost be afraid to walk in. However, when you do, it almost looks like an old diner. There are booths along one wall and a short bar that overlooks the grills and the cooks. Every employee is very friendly and helps make the restaurant seem like a welcoming environment. Of course, the thing to order here is the burger and fries. They also offer a variety of shakes. The other hole-in-the-wall burger restaurant in Waco is called Kitok. It is located a little closer to Baylor than Dubl-R, but it is still on the same road. The thing that sets Kitok apart from Dubl-R is its oriental fries, which are a mix of real fries, onion rings and fried vegetables. They are a delicious in addition to one of its burgers. Both restaurants are affordable and always busy, which in my eyes are two good things!

Pic 1

A great breakfast restaurant in Waco is Café Cappuccino. There are two locations and a guaranteed wait on any weekend morning. While the service is not always the best because they are so busy, the food is amazing. I always get the breakfast quesadillas with salsa! They are filling and made with delicious ingredients. I am not a coffee drinker, but have heard that the cappuccinos are good too!

I know that these are only a few restaurants, but Waco has many others that are sure to amaze you. For most students, you’re only in Waco for four short years, so it’s important to try these Waco hot spots while you can and avoid the big chain restaurants!

6 thoughts on “Waco’s Best Restaurants

  1. Hello,
    Amazing Post!!!!,I enjoyed over read your blog post. Your blog have nice information, Motivate Yourself to Workout I hope It will help many of them who looking this pretty information.

  2. Really instructive! I have benefited a lot from this blog. Looking forward to something new in the future. I am one of your Permanent Visitors.
    Thank you!

  3. Hi,
    I really appreciate your writing skills and the way you explain I will try to implement this on my blog This article is really helpful and informative.
    Thanks!

  4. your post is very informative and helpful. I am very happy with you because you are published this content. I am a permanent visitor on your site.

  5. The company focuses on the research and development of flux cored solder wire which can still have superior wettability on various metal surfaces that are not easy to weld, drag welding and high speed spot, strong drag welding property and low residue. The solder wire produced by our company is refined with refined tin, pure lead, high-grade oxidation resistant alloy, high-grade hydrogenated resin, rosin and activator. The company’s solder wire has the following unique advantages:
    1. When welding, rosin does not splash, does not explode tin, has little smoke and smell;
    2. Good wettability, bright solder joint, easy tin coating, neat winding, no knotting when using automatic soldering machine;
    3. The flux distribution in the middle of tin wire is uniform, and there is no flux break in the wire core;
    4. Less scum on the soldering iron head, the solder wire will not be tangled and the pipe will not be blocked when the automatic soldering machine is used for welding.
    lead free solder
    lead solder manufacturer

  6. At our clinic, we recognize the challenges faced by individuals with Attention Deficit Hyperactivity Disorder (ADHD) and Post Traumatic Stress Disorder (PTSD). These conditions can have a profound impact on a person’s daily life, affecting their ability to focus, manage their emotions, and maintain healthy relationships. Our team of experienced healthcare professionals is dedicated to providing comprehensive and personalized care to every patient we serve, which is why we are thrilled to announce our telehealth services for individuals with ADHD and PTSD.

Leave a Reply

Your email address will not be published. Required fields are marked *